How To Fix A Metal Sliding Door Off Track

Begin by inserting the bottom pivot into the bracket which can be screwed to the floor to the door jamb or both.

How to fix a metal sliding door off track.

Take the flat head screwdriver and insert it into the track channel using it to loosen any dirt or debris that may be present. If you have a sliding closet door that glides on a bottom track clean the track with a damp cloth to ensure smooth gliding. Keep a firm grip on both edges of the door while. If your patio door track is physically broken so that the metal is ripped or worn away it is time to consider a universal replacement kit.

Use a wire brush to clean off the dirt or debris. Then hold the spring loaded top pivot down while you swing the top of the door toward the frame and under the door track. Place a blanket or rug onto the floor and lay the door onto it for a safe spot. Whether your door is unhinged from the top or bottom angle it at 15 to 30 degrees away from the unhinged track and slowly pull it outwards from the closet.

If a malfunctioning sliding door is a chronic problem see if the track is dirty. Remove the door from the track. Once the door is approximately under the hole in the track release the pivot. Open the door about half way lift it straight up and pull the bottom toward yourself until it is free of the track.

Parts for these doors are readily available at home centers hardware stores or online. How to clean or fix a door track. 6 sliding glass door track product code. Remove a door by lifting and tilting the bottom out.

Grab the door from both sides and lift it off the track. Step 2 prepare the door completely open your sliding patio door. Lubricate the rollers but not the track because lubricant will act as a magnet for dust. Is your sliding glass door hard to open and close.

Products used in this video. Built up dirt or loose debris can cause a door to stop sliding and ride off the track.